QMS Magicolor 6100, Operation Manual

Page: 93 / 224

B
& ( " '$9
" /" "55A
This hotlink displays a screen that shows the communications settings of the printer.
Default Chaining
Identifies whether tray chaining is Off or On. Tray chaining allows the
printer to draw media from another input source with either the same or
any size of media (dependent on the choice selected) automatically
when the first input source empties.
Configuration Menu: Operator Control/Chain Inputbins
Default Paper
Tray Tells you which input source is the default.
Configuration Menu: Operator Control/Inputbin
Number of Paper
Trays Tells you the number of input sources available on your printer.
Configuration Menu: No equivalent.
Page Stack Order Tells you what order (e.g., face down) the page stack will be in.
Configuration Menu: No equivalent.
Left Margin Identifies the amount (in .01" increments) the image is adjusted
horizontally on the page.
Configuration Menu: Administration/Engine/Image Alignment/Horiz
Offset
Top Margin Identifies the amount (in .01" increments) the image is adjusted vertically
on the page.
Configuration Menu: Administration/Engine/Image Alignment/Vertical
Offset
Resolution Identifies the printer resolution.
Configuration Menu: Administration/Engine/Def. Resolution
Serial IF
Identifies the settings for the serial interface.
Configuration Menu: Administration/Communications/Serial
Parallel IF
Identifies the settings for the parallel interface.
Configuration Menu: Administration/Communications/Parallel
Optional NIC
(IF 1)
Identifies the settings for the optional Optional NIC interface, if installed.
» Note: You won’t see this in the front panel until this option is
installed.
Configuration Menu: Administration/Communications/Optional NIC