QMS Magicolor 6100, Operation Manual

Page: 28 / 224

; .
$)
1 Take a stack of about 250 sheets (½ ream).
» Note: Don’t unwrap the paper above the printer as this might cause paper
particles to fall into the printer.
2 Holding the stack with one hand, fan the paper with the other.
This gets air through the sheets and prevents static buildup.
3 Take off the top and bottom sheets.
Residual glue buildup on these sheets may cause media jams.
;
1 Remove the media cassette from the printer.
2 Adjust the media guides to fit the size paper you’re loading.
Squeeze the retainers at the ends of the left guide and/or the center guide, move
the guide to the appropriate location (media sizes are listed on the cassette), and
release the retainers.
3 Push the media pressure plate down to lock it in position.
*
*