QMS Magicolor 6100, Operation Manual

Page: 190 / 224

/25
)
;
"=,"*/
Remove the toner cartridges and gently rock them
horizontally five or six times to redistribute the toner. Then,
reinstall the cartridges.
One or more toner cartridges may be defective. Check the
toner cartridges, and install new ones, if necessary.
Check your media type—envelopes, glossy stock, labels,
transfer media, and thick stock have to be set in the thick
stock mode.
If the toner smudges are on only the front of the page:
Remove the toner cartridges and gently rock them five or
six times to redistribute the toner. Then, reinstall the
cartridges.
One or more toner cartridges may be defective. Check the
toner cartridges, and install new ones, if necessary.
If toner smudges are on the back of the page:
Replace the cleaning roller.
If that doesn’t work, replace the transfer roller.
If that doesn’t work, replace the fusing unit.
If toner smudges are on the front
and
back of the page:
Open the printer once and close it again to clean the image
transfer roller.
If the image of the previous page comes out lightly:
Clean the cleaning roller and reinstall it.