QMS Magicolor 6100, Operation Manual

Page: 42 / 224

,*
*
$
,* *
Caution: The OPC belt is
extremely sensitive to bright light
and direct sunlight. Always leave it
in its protective bag until you’re
ready to install it. Any exposure to
light should be limited to less than
two minutes, or permanent
damage could result. If you suspect
a belt is damaged due to exposure to light, put the belt in a dark place to recover.
Depending on the amount of exposure, recovery may take up to two hours. Recovery
time is dependent on the amount of exposure sustained, and recovery is not
guaranteed.
Also, handle the cartridge carefully. The belt is also extremely sensitive to hand oils
and scratches, both of which reduce print quality.
1 Open the printer’s top and
front covers.
Caution: Opening the front
cover pulls the toner cartridges
forward slightly to make room
for the OPC belt cartridge. You
could damage the OPC belt if
you don’t do this.