EPAQ-9410
Hardware Programming Reference 0.16
________________________________________________________________________
________________________________________________________________________
Copyright © 2019 QEI
Page 46
5.18 IRIG COAX
J9
Tested by QEI
5.19 100BaseFX Ports
All LED’s are RED
L/A – top
TX – bottom
PORT 14 (J10)
PORT 15 (J11)
TX –left
RX - right
Bug 350 - bring up Ethernet over fiber
basic test procedure for
PORT 14 (J10)
PORT 15 (J11)
remove copper Ethernet connection
remove fiber Ethernet connection
confirm that no LED's are on at the fiber Ethernet ports
connect PORT 14 (J10) to local network via Startech Fiber Ethernet
Media
Converter (MCM110ST2)
confirm top LED is mostly on, bottom LED is mostly off
use ping utility to ping another machine
ping 192.168.24.1
both LED's are blinking
repeat for
PORT 15 (J11)
5.20 10/100BaseTX Ethernet Ports
PORT 16 – J12B
PORT 17 – J12A
PORT 18 – J12D
PORT 19 – J12C
Each connector contains
one Yellow (TX) (Right) and one Green (L/A) (Left) LED.
File a bug about inconsistency of LED’s in 05-055104-001 ePAQ-94XX MultiFunction
Gateway Spec Rev H16.pdf
Not tested: LED patterns under various conditions. QEI says they have tested this and all
is well.
