EPAQ-9410
Hardware Programming Reference 0.16
________________________________________________________________________
________________________________________________________________________
Copyright © 2019 QEI
Page 31
5.
Exit the ADSToolkit_std.exe programming utility
6.
Power down the board.
7.
Configure the board for NOR FLASH Boot Mode
8.
Open Hyper Terminal, N81, no flow control, 115200 baud-rate
9.
Power up the board
10.
The board should boot and display U-Boot sign-on message and U-Boot
command prompt.
4.1.1
NOR Flash programming via TFTP Server
The TFTP server can be setup in several ways:
•
Linux TFTP server with Linux (physical machine or VMWare virtual machine)
•
Windows TFTP server
For Windows, TFTPD32 from
To setup TFTPD32 server, follow regular installation instructions for TFTPD32, standard
edition.
Run the TFTPD32 server application.
Set the Current Directory to point to the folder containing Linux kernel and Linux Root
Filesystem programming files. This folder will become the root of TFTP server.
