EPAQ-9410
Hardware Programming Reference 0.16
________________________________________________________________________
________________________________________________________________________
Copyright © 2019 QEI
Page 39
W 0xB4080002: 0x08
cat /dev/ttyS0 &
cat fox.txt > /dev/ttyS1
PORT 3 TX, PORT 4 RX
root@QEIprocFull:/oe ./mmdump -a 0xb4080000 -o 0x02 -b 0x00
W 0xB4080002: 0x00
root@QEIprocFull:/oe ./mmdump -a 0xb4080000 -o 0x03 -b 0x08
W 0xB4080003: 0x08
root@QEIprocFull:/oe cat /dev/ttyS3 &
root@QEIprocFull:/oe cat fox.txt > /dev/ttyS2
PORT 4 TX, PORT 3 RX
root@QEIprocFull:/oe ./mmdump -a 0xb4080000 -o 0x03 -b 0x00
W 0xB4080003: 0x00
root@QEIprocFull:/oe ./mmdump -a 0xb4080000 -o 0x04 -b 0x08
W 0xB4080004: 0x08
root@QEIprocFull:/oe cat /dev/ttyS2 &
root@QEIprocFull:/oe cat fox.txt > /dev/ttyS3
5.9 OPTIONS S1 DIP switches
S1 DIP switches 1-4
- verify front panel DIP switch SW1
3.7.8 Option DIP Switch Register
./mmdump -a 0xb4030000 -o 0x12 –b
perform walking 0’s and walking 1’s test and verify results
5.10
Status LED’s
HBT L1 L2
PWR L3 L4
- verify front panel LED's D58, D59, D57
3.7.1 Heartbeat Register, 3.7.2 L1 LED Register, 3.7.3 L2 LED Register, 3.7.4
L3 LED Register, 3.7.5 L4 LED Register
all LED's are red
verify that PWR LED is always on (bottom-left)
LED positions:
HBT L1 L2
PWR L3 L4
HBT is at 0xB401_000F
