Proximus 5025 User Manual Download Page 104

Page: 104 / 216

Administration Tasks

102

Configuring the Telephone

Restarting the Telephone

You have to restart the SIP system telephone sometimes, for example, to
activate a changed IP/MAC address allocation configuration.

Forum IPhone 5010/5020
1.

In the device menu, select

Phone Status > Restart Phone

and confirm.

The display shows:

Restart Phone?

Press the

key to confirm.

The telephone starts and is quickly ready for operation once again.

Forum IPhone 5025/5030
1.

In the device menu, select

Restart

and confirm.

The display shows:

Restart Phone?

Press the

Yes

softkey.

The telephone starts and is quickly ready for operation once again.

Forum IPhone 5040
1.

In the device menu, press the

Restart

icon.

The display shows:

Restart Phone?

Select the

Yes

option with the key and confirm the selection with the

key.

The telephone starts and is quickly ready for operation once again.

Restoring Factory Settings

If the SIP system telephone cannot be configured via the Forum 500 /
Forum 5000 communications system you should reset to factory settings.

Forum IPhone 5010/5020
1.

In the device menu, select

Phone Status > Factory Default

and confirm.

Enter the administrator password (see page 103). Press the

key (

Done

)

to confirm.

The display shows:

RestoreDefaults?

Press the key (

Yes

) to confirm.

Summary of Contents for 5025

























































































































































































































Search results

Summary of Contents for 5025

Reviews:

Related manuals for 5025

Brands by name

Popular brands

Proximus 5025, User Manual

Search results

Summary of Contents for 5025

Reviews:

Related manuals for 5025

Brands by name

Popular brands