Proximus 5025 User Manual Download Page 102

Page: 102 / 216

Local Telephone Settings

100

Configuring the Telephone

Unpairing a Bluetooth Headset

In the device menu, press the

Bluetooth

icon.

Ensure Bluetooth functionality is enabled. If it is not enabled, swipe the
Bluetooth toggle switch

to the right.

In the

Paired Devices

list, press the

button corresponding to the Blue-

tooth headset you want to unpair.

Press

Yes

to unpair the device.

The Bluetooth headset is removed from the list of

Paired Devices

Connecting to a Different Paired Bluetooth Headset

In the device menu, press the

Bluetooth

icon.

Ensure Bluetooth functionality is enabled. If it is not enabled, swipe the
Bluetooth toggle switch

to the right.

In the

Paired Devices

list, press the desired Bluetooth headset you want to

connect to.

The phone attempts to connect to the headset.

Note:

If connecting fails, an error message is displayed. Try to connect
again, or cancel the attempt.

Press the

button to acknowledge the successful connection.

The connected Bluetooth headset is ready to use.

When a Bluetooth headset is successfully connected, a Bluetooth connected
icon

is displayed.

Setting the Display

Forum IPhone 5010/5020
1.

In the device menu, select

Preferences > Display

2. Contrast Level

: Setting contrast level

3. Backlight

(only available on the Forum IPhone 5020): Setting whether

the display is to be lit after a key is pressed (

Auto

setting) or not (

Off

setting)

Summary of Contents for 5025

























































































































































































































Search results

Summary of Contents for 5025

Reviews:

Related manuals for 5025

Brands by name

Popular brands

Proximus 5025, User Manual

Search results

Summary of Contents for 5025

Reviews:

Related manuals for 5025

Brands by name

Popular brands