Installation
34
Installing Expansion Modules
Note:
You can label the paper key card manually or print it via the web
console of the Forum 500 / Forum 5000 communications
system (in the
Configurator
,
Telephony > Devices > System
phones
menu). For further information please refer to the
online help topic entitled “Printing Label Strips”.
Attaching Multiple Expansion Modules
Up to a total of three Expansion Modules can be daisy-chained to your SIP
system telephone:
●
The Forum 500(0) Keypad Paper FIP 5020/5025/5030/5040 provide
additional 48 programmable keys then.
●
The Forum 500(0) Keypad Display FIP 5025/5030/5040 provide a total
of 252 programmable keys (three modules with three pages of
28 programmable keys each) then.
Use the following procedure to connect additional Expansion Modules to your
SIP system telephone:
1.
Remove the two connector plate insertion area rubber caps on the right
side of the Expansion Module that is connected to the phone.
2.
Turn your phone and connected Expansion Module over so that the back is
facing you.
3.
Turn your additional Expansion Module(s) over so that the back of the
module(s) is/are facing you.
4.
Connect the additional Expansion Module(s) to your initial Expansion
Module using the connector plate(s) as indicated in the illustration below.
