Status Menus
124
Telephoning
state (e. g. an answering machine is in announcement mode), you pick up the
call. The subscriber for whom you picked up the call must belong to a user
group for which
Call removal
authorisation is activated, otherwise you will
not be able to use the “Pick-up selective” function.
Note:
If the called subscriber is a member of a user group for which
pick-up protection is active, “Pick-up” and “Pick-up selective”
are not possible.
Take
: You accept a current call from a different terminal at your telephone
and continue your call on your telephone. The prerequisite is that your
telephone and the other terminal have the same internal call number.
Announcement
: After entering the call number, you can initiate an
announcement to another system telephone, or on a group of system
telephones (see also the chapter
Announcements (with and without
Intercom
: After entering the device ID, you can initiate an announcement to a
single
system terminal (see also the chapter
on page 148). The microphone is activated on the terminal
called and the person you are calling can immediately answer your
announcement. The “intercom” function cannot be used for announcements
to a group of terminals.
Charges
: For each trunk key, you can view the charges for the last call as well
as the total charges.
Door opener
: This activates the door opener.
Suppress number
: For the following (external or internal) call, your call
number will not be shown to the subscriber. This menu entry is dependent on
the system settings.
Transmit number
: For the following call, your call number will be presented
to the called subscriber. This menu entry is dependent on the system settings.
LCR off
: This switches off the LCR function.
VIP call
: Your next internal call is made as a VIP call.
Main menu
: This opens the Main menu, see also the chapter