Proximus 5025 User Manual Download Page 101

Page: 101 / 216

Local Telephone Settings

Configuring the Telephone

Enabling and Disabling Bluetooth Functionality

In the device menu, press the

Bluetooth

icon.

Swipe the Bluetooth toggle switch

to the right to enable Bluetooth

functionality.

Swipe the Bluetooth toggle switch

to the left to disable Bluetooth

functionality.

When Bluetooth functionality is enabled, a Bluetooth enabled icon

displayed.

Pairing a Bluetooth Headset

In the device menu, press the

Bluetooth

icon.

Ensure Bluetooth functionality is enabled. If it is not enabled, swipe the
Bluetooth toggle switch

to the right.

Press

Available Devices

Note:

The Forum IPhone 5040 continually scans for supported Blue-
tooth headsets when enabled. Refer to the respective Blue-
tooth headset documentation for pairing procedures that must
be performed on your Bluetooth headset.

Press the desired Bluetooth headset you want to pair.

The phone attempts to pair the headset and to connect to the headset.

Note:

If pairing or connecting fails, a failed error message is diplayed.
Try to pair or connect again, or cancel the attempt.

Press the

button to acknowledge the successful connection.

The connected Bluetooth headset is added to the list of

Paired Devices

and is ready to use.

When a Bluetooth headset is successfully connected, a Bluetooth connected
icon

is displayed.

Summary of Contents for 5025

























































































































































































































Search results

Summary of Contents for 5025

Reviews:

Related manuals for 5025

Brands by name

Popular brands

Proximus 5025, User Manual

Search results

Summary of Contents for 5025

Reviews:

Related manuals for 5025

Brands by name

Popular brands