Proximus 5025 User Manual Download Page 105

Page: 105 / 216

Administration Tasks

Configuring the Telephone

103

Forum IPhone 5025/5030
1.

When the device menu has been opened, press the

Advanced

softkey.

Enter the administrator password (see page 103). Press the

Enter

softkey

to confirm.

Navigate with the key to the

Reset

menu entry and confirm with the

key.

The display shows:

Factory Default?

Select the

Yes

option with the key and confirm the selection with the

key.

Forum IPhone 5040
1.

When the device menu has been opened, press the

Advanced

softkey.

Enter the administrator password (see page 103). Press

to confirm.

Press the

Reset

icon.

The display shows:

Factory Default?

Press the

Yes

button.

SIP System Telephone Password

Certain entries in the device menu can only be accessed via password for
security reasons. This factory settings password is “23646” (ADMIN). The
password allows access to the advanced device menu.

Summary of Contents for 5025

























































































































































































































Search results

Summary of Contents for 5025

Reviews:

Proximus 5025, User Manual, Page: 105 / 216

Search results

Summary of Contents for 5025

Reviews: