VTrak 15200 User Manual
132
L cont.
Logical Drive, Rebuild – Main Menu, 6 Enter
Logical Drive, Redundancy Check – Main Menu, 6 Enter
Logical Drive, Retry Count – Main Menu, 3 Enter, 4 Enter
Logical Drive, Synchronize – Main Menu, 6 Enter
LUN Setting (SCSI Assignment), Logical Drive – Main Menu, 3 Enter, 4 Enter
M
Management, Controller – Main Menu, 1 Enter
Management Port – Main Menu, 4 Enter
Management Port, Gateway – Main Menu, 4 Enter, 1 Enter
Management Port, IP Address – Main Menu, 4 Enter, 1 Enter
Main Board – Main Menu, 1 Enter, 1 Enter, 4 Enter
Maintenance Activity Monitor – Main Menu, 6 Enter
Max. Burst Length, iSCSI – Main Menu, 5 Enter, 1 Enter
Modify Controller Parameters – Main Menu, 1 Enter
N
Name, Logical Drive – Main Menu, 3 Enter, 4 Enter
Name, Node – Main Menu, 5 Enter, 1 Enter
Name, SNMP – Main Menu, 4 Enter, 4 Enter
Network, iSCSI – Main Menu, 5 Enter
Node ID, iSCSI – Main Menu, 5 Enter, 1 Enter
Node, iSCSI – Main Menu, 5 Enter
P
Password, Telnet – Main Menu, 4 Enter, 2 Enter
PDM Auto Start Option – Main Menu, 3 Enter
Physical Drive, Boot Sector – Main Menu, 2 Enter
Physical Drive Diagnostics – Main Menu, 2 Enter
Physical Drive, LED Blink – Main Menu, 2 Enter, 5 Enter
Physical Drive Parameters, View – Main Menu, 1 Enter
Physical Drive, Reserve Sector – Main Menu, 2 Enter
Physical Drive, Write Cache – Main Menu, 2 Enter
Ping, Network – Main Menu, 4 Enter
Ping, iSCSI – Main Menu, 5 Enter
Port, iSCSI – Main Menu, 5 Enter, 2 Enter, port no. Enter
Power Supply – Main Menu, 1 Enter, 1 Enter, 4 Enter
Priority, Logical Drive – Main Menu, 3 Enter, 4 Enter
R
Read Only Community, SNMP – Main Menu, 4 Enter, 4 Enter
Reboot VTrak – Main Menu, 1 Enter, 1Enter
Remapping Table – Main Menu, 2 Enter, 6 Enter