![background image](http://html.mh-extra.com/html/promise-technology/vtrak-15200/vtrak-15200_user-manual_1617262044.webp)
VTrak 15200 User Manual
36
Highlight this name and click the Logon button. Click OK on the confirmation
dialog box.
5.
Go to Active Sessions tab. The status of selected iSCSI name should display
connected
.
6.
Click OK button on iSCSI Initiator Properties dialog box to close it.
7.
To logoff from Vtrak15200, bring up Microsoft iSCSI Initiator again. Go to the
Active Sessions tab and click the Log Off button.
For more information on setting up iSCSI, see page 41 and page 51.
VTrak Setup with WebPAM PRO
Set up with WebPAM consists of the following steps:
1.
Log-in to WebPAM (below)
2.
Add a Subsystem (page 39)
3.
Access a Subsystem (page 40)
4.
iSCSI Configuration (page 41)
5.
Create a Logical Drive (page 47)
6.
Log-out of WebPAM PRO (page 49)
7.
Internet connection using WebPAM PRO (page 49)
Log-in to WebPAM PRO
1.
Launch your Browser.
2.
In the Browser address field, type in the IP address of the Host PC or Server
where you installed WebPAM PRO, as explained below.
Note that the IP address shown below is only an example. The IP address
you type into your browser will be different
If you chose the External Security option during WebPAM PRO installation
(see page 30), use the
Secure
connection. Otherwise use the
Regular
connection.
Regular Connection
•
WebPAM PRO uses an HTTP connection. . . . . . . . . . . . . . . . .http://
•
Enter the Utility Server’s IP address . . . . . . . . . . . . . .192.168.1.118
•
Enter the Port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :8080
•
Add promise to launch WebPAM PRO . . . . . . . . . . . . . . . . /promise
Together, your entry looks like this:
http://192.168.1.118:8080/promise