![background image](http://html.mh-extra.com/html/promise-technology/vtrak-15200/vtrak-15200_user-manual_1617262069.webp)
61
Chapter 4: Management with WebPAM PRO
This chapter describes using WebPAM to monitor and manage your RAID
system. This chapter is divided into sections for major WebPAM components as
shown above.
VTrak Status Indicators
Even though WebPAM PRO offers comprehensive monitoring of VTrak, the LED
indicators on the VTrak unit provide important status information.
When the power is switched on, the LEDs on the front of the VTrak will light up.
Figure 1. VTrak 15200 Front Panel LEDs
When boot-up is finished, the Power, FRU and Logical Drive LEDs will display
green. When the VTrak is functioning normally, the Controller Heartbeat LED
blinks five times in five seconds, ten seconds dark, blinks five times again. The
iSCSI LEDs flash green when there is activity on that channel. See the table
below.
•
VTrak Status Indicators (below)
•
Utility Configuration (page 82)
•
Drive Status Indicators (page 62)
•
Security (page 84)
•
Audible Alarm (page 63)
•
Controller Management (page 85)
•
Log-In /Log-0ut (page 64)
•
Physical Drive Management (page 100)
•
Subsystem Management (page 67) •
Logical Drive Management (page 103)
•
User Management (page 72)
•
Enclosure Management (page 121)
Power
FRU
Status
Logical Drive
Status
iSCSI-1
Activity
iSCSI-2
Activity
Controller
Heartbeat