manualshive.com logo in svg

Promise Technology VTRAK 15200, User Manual

Share
Download
Promise Technology VTRAK 15200 User Manual Download Page 63

Chapter 3: Setup

55

3.

Press Y and Enter to enable CHAP.
You return to the iSCSI Node Parameters menu.

4.

If you plan to use Bi-Directional (Mutual) CHAP, press 13 and Enter to 
access BIDI CHAP Authentication.

Enable BIDI CHAP Authentication(y/n)?>

y

5.

Press Y and Enter to enable CHAP.
You return to the iSCSI Node Parameters menu.

6.

Press R and Enter to move back to the iSCSI Management menu.

Save iSCSI Node Parameters(y/n)?>

y

7.

Press Y and Enter to save the new parameters.
You return to the iSCSI Management  menu.

8.

From the iSCSI Management menu, press 4 and Enter to access iSCSI 
CHAP settings.

  CHAP index Name

Secret

Attribute

-------------------------------------------------------------------------
 0

TestInitiator 0123456789

Peer

-------------------------------------------------------------------------
 iSCSI CHAP Record
 1. Add
 2. Delete
 3. Edit
 R. Return to Previous Menu

Please enter your menu choice>

9.

To add a CHAP record, press 1 and Enter.

Add a new CHAP record
Enter the name>

Peg Leg

Enter the secret>

9A8B7C6D

Peer(y/n)?>

y

New CHAP record added, press Enter key to return

10. Supply the information as prompted and press Enter after each item.
11. Press Enter to return to the iSCSI CHAP Record menu.

  CHAP index Name

Secret

Attribute

-------------------------------------------------------------------------
 

0

PegLeg

9A8B7C6D

Peer

 1

TestInitiator 0123456789

Peer

-------------------------------------------------------------------------

Summary of Contents for VTRAK 15200























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands