![background image](http://html.mh-extra.com/html/promise-technology/vtrak-15200/vtrak-15200_user-manual_1617262193.webp)
Chapter 2: Installation
185
Replace Cache Battery
The cache battery is located in the Cooling Unit 1 (the left one). The battery is
replaced as an individual part. No tools are required for this procedure.
Note that the Battery LED on Cooling Unit 2 is always dark.
1.
To replace a cache battery, do the following:
2.
Verify that the battery LED is amber or red (above).
3.
Press the release button and pull the handle downward as shown above.
Caution
•
There is a risk of explosion if the battery is replaced by the
incorrect type.
•
Dispose of used batteries according to the instructions that
accompany the battery.
•
While the battery is removed, your system will be vulnerable
to a power failure. Temporarily set your cache policy to write-
through before starting this procedure. See page 113
(WebPAM PRO) or page 149 (CLU).
Battery LED