![background image](http://html.mh-extra.com/html/promise-technology/vtrak-15200/vtrak-15200_user-manual_1617262134.webp)
VTrak 15200 User Manual
126
1.
Start your PC’s terminal emulation program.
2.
Press Enter once to launch the CLU.
There are eight functional groups in the CLU:
Subsystem Management
– Allows you view controller information, change
parameters, monitor the enclosure, update the firmware and reboot the VTrak.
Physical Drive Management
– Enables you to view disk drive assignments and
parameters, wipe boot and reserve sectors, change disk drive settings and
perform diagnostics.
Logical Drive Management
– Allows you to view logical drive information,
create and delete logical drives; change LUN settings, cache policy, hot spare
policy, retry count, SMART settings; rebuilding, synchronization and migration
priorities.
Network Management
– Make Management Port, Telnet, and SNMP settings,
set IP address for management port, TFTP server and gateway; and set subnet
mask.
iSCSI Management
– Set Node, Port, SLP, CHAP, iSNS settings and ping over
the iSCSI channels.