![background image](http://html.mh-extra.com/html/promise-technology/vtrak-15200/vtrak-15200_user-manual_1617262060.webp)
VTrak 15200 User Manual
52
•
The node's name. An iSCSI node is identified by its name
•
The node's alias. A user-friendly string associated with an iSCSI Node. Not a
substitute for the iSCSI Name
•
Max outstanding R2T. Sets the maximum number of outstanding ready to
transfer PDUs (a number)
•
First burst length. Maximum length of an unsolicited data sequence (kb)
•
Maximum burst length. Maximum length of a solicited data sequence (kb)
•
Maximum number of connections. Initiator and target negotiate the actual
number (default is 1, maximum is 65535)
•
Default time to wait. After a dropped connection, the number of seconds to
wait before attempting to reconnect
•
Default time to retain. Number of seconds after time to wait (above) before
reassigning outstanding commands
•
Initial R2T. Allows initiator to begin sending data to a target without receiving
a ready to transfer command.
•
Header Digest. Enables the use of Header Digest (CRC)
•
Data Digest. Enables the use of a Data Digest (CRC)
•
CHAP Authentication. Enables Challenge Handshake Authentication
Protocol
•
BIDI CHAP Authentication. Enables bi-directional CHAP authentication
A detailed explanation of these iSCSI functions, how and when they are used,
and their relationship to one another is beyond the scope of this document. For
more information, contact the Internet Engineering Task Force at http://
www.itef.org/.
Network Ports
1.
Press 2 and Enter to access iSCSI Network settings.
iSCSI Network Port Settings
1. Port 1
2. Port 2
R. Return to Previous Menu
Please enter your menu choice>
1
2.
Press 1 or 2 to select an iSCSI Port then press Enter.
Current iSCSI Port #1 Network Settings:
TCP Port Number: 3260
DHCP: disabled
IP address: 10.0.11.2
Subnet Mask: 255.0.0.0
Default Gateway: 0.0.0.0