manualshive.com logo in svg

Promise Technology VTRAK 15200, User Manual

Share
Download
Promise Technology VTRAK 15200 User Manual Download Page 108

VTrak 15200 User Manual

100

Physical Drive Management

•

Physical Drive View (below)

•

Physical Drive  Information (page 101)

Physical Drive View

The Physical Drive View shows all of the disk drives working under this 
Controller. 

To access Physical Drive View, click on the 

 icon. The Physical Drive View 

screen will display.

ID

 – The Controller channel to which each disk drive is attached. Only channels 

with a disk drive appear in the list. If you have a drive on a channel but it does not 
show in Physical Drive View, something is wrong with the drive or there is a bad 
connection.

Physical Drive Model

 – Refers to the drive manufacturer's identification.

Physical Drive Capacity

 – The total data storage size in gigabytes. Not the 

available capacity.

Physical Drive Status

 – Refers to functional status of an individual disk drive.

•

Functional

 means normal.

•

Disk is being rebuilt

 means that this drive is the Target Drive of the rebuild 

operation that is in progress.

•

Disk Offline

 means this drive is not available for use due to an error.

Status

 – Refers to assignable status of an individual disk drive.

•

Free

 means available for use in a logical drive.

•

Assigned

 means that currently belongs to a logical drive.

•

Error 

means not available due to a problem with this disk drive.

Note:

 If you assign a disk drive as a hot spare, its Assignment will still show Free, 

since it does not yet belong to a logical drive.

Summary of Contents for VTRAK 15200























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands