![background image](http://html.mh-extra.com/html/promise-technology/vtrak-15200/vtrak-15200_user-manual_1617262095.webp)
Chapter 4: Management with WebPAM PRO
87
The User who sets the lock is the only one who can release it. Be sure to release
the lock when you are finished, so other Users are not locked out.
Users who attempt to access a locked controller see the username of the
individual who locked it.
The status of the lock buttons depends on the condition of the controller. For
example, if the controller already locked, both Lock buttons will be grayed out.
Change Management Port IP Address
Correct IP settings are essential for your Host PC and VTrak to communicate.
You make initial settings during setup and again when the addresses change on
your network. You must have Creation Rights to access this function.
1.
Click on the Controller Settings menu and select Change IP Address.
The Change IP Address screen displays.
2.
In the Change IP Address screen, enter or change the IP addresses for the
Host PC and your TFTP Server, or enter or change your Subnet Mask.
3.
Click the Submit button when you are done.
4.
Restart the VTrak in order for the new Management Port IP address and
Subnet Mask settings to become effective.