![background image](http://html.mh-extra.com/html/promise-technology/vtrak-15200/vtrak-15200_user-manual_1617262179.webp)
Chapter 5: Management with the CLU
171
Restore to Default Settings
Use this feature to set all iSCSI settings to their default values. Note that this
action will set IP address and port settings to the default values and disable all
iSCSI features.
1.
Press 6 and Enter to access iSCSI iSNS.
Set to default iSCSI settings(y/n)?>
y
Confirm again, set to default iSCSI settings(y/n)?>
2.
Press Y and Enter to restore defaults or N and Enter to cancel.
3.
Press Y and Enter to confirm or N and Enter to cancel.
Event Viewer
Use this function to review all events in the event queue. This information is
especially helpful for troubleshooting. The most recent 1024 events will display.
There is no delete event function.
1.
From the Main menu, press 7 and Enter to access the Event Viewer.
VTrak 15200 Event Information:
Current event queue head seq ID#: 78
Current valid seq ID# range: 0-78
Seq ID# Severity Level
Timestamp
Description
------------------------------------------------------------
69
Informational
4/5/2004 23:14:51 Quick initialization completed
70
Major
4/5/2004 23:16:45 Logical Drive Array1 is critica
71
Fatal
4/5/2004 23:16:45 Fatal Error for Disk 5.
72
Major
4/5/2004 23:16:45 Disk Set Down: 5.
73
Informational
4/5/2004 23:17:06 Rebuild begun on Logical
74
Major
4/5/2004 23:18:31 Logical Drive Array1 is critica
75
Informational
4/5/2004 23:18:31 Logical Drive Array1, Rebuild
76
Informational
4/5/2004 23:18:31 Delete Logical Drive Array1.
77
Informational
4/5/2004 23:18:38 Disk Plugged in: 5.
78
Warning
4/5/2004 23:19:30 Wiped out reserved sector: 5.
q: quit, +/k: forward, -/j: backward
s: start of event queue, e: end of event queue
Enter: repeat the most recently used command
Your input?>
q
2.
To move forward in the queue, press + or K.
To move backward in the queue, press - or J.
To move to the beginning of the queue, press S.
To move to the end of the queue, press E.
To repeat the most recent entry, press Enter.
3.
Press Q and Enter to return to the Main Menu.