![background image](http://html.mh-extra.com/html/promise-technology/vtrak-15200/vtrak-15200_user-manual_1617262026.webp)
VTrak 15200 User Manual
18
Connect the Power
VTrak systems will operate on either 115 volts AC or 230 volts AC. The VTrak
15200 includes two replaceable power supply modules with autosense voltage
selection and Power Factor Correction (PFC).
Figure 11. Power Connections and Switch
Plug the power cords into the power connections on both power supplies. Use
the retaining bails to hold the power cords in place and prevent an accidental
disconnection.
Turn both power supplies on.
When the power is switched on, the LEDs on the front of the VTrak will light up.
Figure 12.VTrak 15200 Displays
Warning
Power supplies can contain over 240 volts. This high voltage, if
mishandled, can cause serious injury or death.
Do not touch or handle a power cable or power supply unless you
have been trained and prepared to perform this task.
Power
Switch
Cooling
Fan
Power
Connection
Retaining
Bail
Power
FRU
Status
Logical Drive
Status
iSCSI-1
Activity
iSCSI-2
Activity
Controller
Heartbeat