manualshive.com logo in svg

Promise Technology VTRAK 15200, User Manual

Share
Download
Promise Technology VTRAK 15200 User Manual Download Page 158

VTrak 15200 User Manual

150

the Rebuild, Synchronize or Migrate goes faster but the logical drive takes longer 
for reads and writes. A low priority has the opposite result.

1.

Type 6 and Enter to access Priority. 

 Current rebuilding priority:

High

 Current synchronization priority:High
 Current migration priority:

High

 Change to low RBLD priority for LD 2(y/n)?>

n

2.

Press Y and Enter to change Rebuilding priority. Press N and Enter to leave 
it unchanged. 

 Change to low SYNC priority for LD 2(y/n)?>

n

3.

Press Y and Enter to change Synchronization priority.  Press N and Enter to 
leave it unchanged. 

 Change to low migration priority for LD 2(y/n)?>

y

4.

Press Y and Enter to change Migration priority.  Press N and Enter to leave it 
unchanged. 
The Screen returns to the Modify Logical Drive Priorities menu.

Hot Spare Policy

A Hot Spare is a disk drive not assigned to a logical drive but available to replace 
a failing disk drive that belongs to a logical drive. 

A 

Global

 spare can be used by any logical drive that needs it. A 

Dedicated

 spare 

can only be used by a specific logical drive.

1.

Press 7 and Enter to access the Hot Spare Policy. 

Current hot spare policy:
Global
Change to Dedicated hot spare policy for LD 2(y/n)?>

y

2.

Press Y and Enter to change hot spare policy.  Press N and Enter to leave it 
unchanged.

Available free Physical Drive(s):
8
9

Choose the free Physical Drive for the dedicated hot spare>

8

3.

If you change to a Dedicated hot spare drive, type the ID number of an 
available physical drive
The Screen returns to the Modify Logical Drive Priorities menu.

Note:

 Be sure Auto Rebuilding is enabled (below).

Summary of Contents for VTRAK 15200























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands