PROFACE PL-B900 Series, User Manual

Page: 59 / 98

Installation and Wiring
4-5
PL B900/B910 Series Users Manual
2) Loosen and remove the middle three
screws from the terminal strip. Align
the crimp terminals with each screw
hole, and tighten the screws.
^
^
^
φφφφφ
3.2 mm or larger
Max. 6.0 mm
• The colors used in these
figures are for the cable
which came with the PL.
• This power cable is designed
only for AC100V/115V use.
When using other than
AC100V/115V power, use a
cable that is designed spe-
cifically for that level of
power.
FG
L
N
FG
L
N
Black
White
Green/Yellow
Transparent Cover
Attachment Screws
3) Reattach the terminal strip’s transpar-
ent cover and secure it in place with its
attatchment screws.
• Crimp Terminal Types :
V1.25-3, by J.S.T. or equivalent
(JIS standard part number :
RAV1.25-3)
• Crimp terminals must be the same
as shown below.