PROFACE PL-B900 Series, User Manual

Page: 44 / 98

3-6
PL B900/B910 Series Users Manual
2) Unscrew the two (2) attachment
screws from the PL’s Rear Face
Blank Panel, and remove it.
1) Unscrew the PL front face’s FDD
blank panel’s attachment screw (1).
Remove the blank panel.
PL Rear Face
Blank Panel
3.1.4 Installing the FDD Unit (PL-FD210)
• The PL-FD-210 can only be used with the PL-B900 and PL-B910 (4-slot type) units,
and cannot be used with the PL-B901 and PL-B911 (2-slot type) units.
• The PL-FD200 and the PL-FD210 cannot be used at the same time.
3) Loosen the FDD unit chassis two (2)
upper adjustment screws, and re-
move the unit’s two (2) lower set
screws to allow the FDD unit to
slide forward.
FDD blank (filler) panel
Lower Set
Screws
Upper Adjustment
Screws