System Setup
5-10
PL B900/B910 Series Users Manual
Selecting the PNP/PCI CONFIGURATION SETUP menu item displays the
following screen.
!
PNP OS Installed
Setting used when the user's OS complies with Plug-And-Play standards.
The selection options are either [Yes] or [No]. The [No] setting is factory
set and recommended for most users.
!
Resources Controlled By
The Plug and Play feature allows you to designate whether the allocation of
I/O Port, IRQ and DMA resources is performed automatically or manually.
The two selections available are [Manual] and [Auto]. The [Manual]
selection is factory set and recommended for most users.
!
Reset Configuration Data
Designates whether ESCD (Extended System Configuration Data) data
should be erased or not. The two selections available are [Disabled] and
[Enabled]. The [Disabled] selection is factory set and recommended for
most users.
!
ACPI I/O Device Node
When an I/O device is connected to the PL that is ACPI compliant, the PL's
ACPI feature is enabled. The two selections available are [Enabled] and
[Disabled]. The [Enabled] selection is factory set and recommended for
most users.
CPU to PCI Write Buffer
: Enabled
PCI Dynamic Bursting
: Enabled
PCI Master 0 WS Write
: Enabled
PCI Delay Transaction
: Enabled
PCI Master Read Prefetch
: Enabled
PCI#2 Access #1 Retry
: Disabled
PCI IRQ Actived By
:Level
Assign IRQ For USB
: Disabled
PNP OS Installed
: No
Resources Controlled By
: Manual
Reset Configuration Data
: Disabled
ACPI I/O Device Node
: Enabled
IRQ-3 assigned to
: Legacy ISA
IRQ-4 assigned to
: Legacy ISA
IRQ-5 assigned to
: PCI/ISA PnP
IRQ-7 assigned to
: Legacy ISA
IRQ-9 assigned to
: Legacy ISA
IRQ-10 assigned to
: Legacy ISA
IRQ-11 assigned to
: PCI/ISA PnP
IRQ-12 assigned to
: Legacy ISA
IRQ-14 assigned to
: Legacy ISA
IRQ-15 assigned to
: PCI/ISA PnP
DMA-0 assigned to
: PCI/ISA PnP
DMA-1 assigned to
: PCI/ISA PnP
DMA-3 assigned to
: PCI/ISA PnP
DMA-5 assigned to
: PCI/ISA PnP
DMA-6 assigned to
: PCI/ISA PnP
DMA-7 assigned to
: PCI/ISA PnP
ROM PCI/ISA BIOS(2A5LEU1C)
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
ESC: Quit
↑↓→←
:Select Item
F1 : Help
PU/PD/+/-:Modify
F5 : Old Values (Shift)F2:Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
5. 2. 5
PNP/PCI CONFIGURATION SETUP
*
The above settings are factory settings.
However, with a PL-B910/PL-B911 (PL-B910 series) unit,
change the
[Assign IRQ for USB] setting to [Enabled].
Summary of Contents for PL-B900 Series
