PROFACE PL-B900 Series, User Manual

Page: 76 / 98

System Setup
5-14
PL B900/B910 Series Users Manual
Selecting INTEGRATED PERIPHERALS SETUP menu item displays the
following screen.
5. 2. 9 INTEGRATED PERIPHERALS
OnChip IDE First Channel :Enabled
IDE Prefetch Mode :Disabled
IDE HDD Block Mode :Disabled
IDE Primary Master PIO :Auto
IDE Primary Slave PIO :Auto
IDE Primary Master UDMA :Auto
IDE Primary Slave UDMA :Auto
Onboard FDC Controller :Enabled
Onboard Serial Port 1 :3F8/IRQ4
Onboard Serial Port 2 :2F8/IRQ3
UR2 Mode :Standard
Onboard Parallel Port :3BC/IRQ7
Parallel Port Mode :SPP
Onboard Serial Port 3 : 3E8H
Serial Port 3 Use IRQ : IRQ9
Onboard Serial Port 4 : 2E8H
Serial Port 4 Use IRQ : IRQ10
ROM PCI/ISA BIOS(2A5LEU1C)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
ESC: Quit
↑↓→←
:Select Item
F1 : Help PU/PD/+/-:Modify
F5 : Old Values (Shift)F2:Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
!
OnChip IDE First Channel
Designates the internal IDE port's setting. The two selections available are
[Disabled] and [Enabled]. The [Enabled] selection is factory set and
recommended for most users.
!
IDE Prefetch Mode
Designates if the IDE drive's high speed access is performed by enabling the
Prefetch Mode. The two selections available are [Disabled] and [Enabled].
The [Disabled] selection is factory set and recommended for most users.
!
IDE HDD Block Mode
Designates the Hard disk's Block Operation Mode. The two selections
available are [Disabled] and [Enabled]. The [Disabled] selection is factory
set and recommended for most users.
!
IDE Primary Master PIO
Designates the Master Drive's PIO (Programmed Input/Output Mode. Only
after the "Internal PCI/IDE" has been set to [Primary] can these IDE Primary
Master PIO settings be entered. The selections available are [Auto], [Mode0],
[Mode1], [Mode2], [Mode3], and [Mode4]. When using the CD-ROM unit,
set this to "Mode 2".
* The above settings are factory settings.
However, with a PL-B910/PL-B911 (PL-B910 series) unit,
change the [Onboard Serial Port 4] setting to [Disabled] ,
change the [IDE Primary Master UDMA] to [Disabled] , and change
the [IDE Primary Slave UDMA] to [Disabled]