PROFACE PL-B900 Series, User Manual

Page: 42 / 98

3-4
PL B900/B910 Series Users Manual
2) Adjust the foolproof positioning
grooves so that they align with the
foolproof positioning pins.
3) Insert the DIM module into the
DIM module socket.
4) Push the DIM module down until
the ejector tabs lock.
5) Replace the rear maintenance cover
and the half cover and secure them
in place with the attatchment
" "
" " " To Remove the DIM Module
When removing the module from its socket, press down on the socket’s ejector
tabs to release the module.
1) Install the DIM expansion module
in the empty socket.
Positioning pins
Positioning grooves
Empty Socket
B u i l t - i n D I M
Module
• Since DIM module sockets are easy to break, be sure to install the
DIM module very carefully.
• Do not change the factory installed DIM module’s socket position.
The PL comes with a single, 64MB DIM module pre-installed. There is one more
empty socket that can be used and the procedures that follow describe how to
install a second DIM module in that socket.
3.1.2 Installing the DIM Module (PL-EM220 / PL-EM230)