PROFACE PL-B900 Series, User Manual

Page: 64 / 98

System Setup
5-2
PL B900/B910 Series Users Manual
Selecting the STANDARD CMOS SETUP menu item produces the following
screen.
Date (mm:dd:yy): Thu,Jul 2 2000
Time (hh:mm:ss): 14 : 50 : 3
CYLS. HEADS PRECOMP LANDZONE SECT0RS MODE
Drive C
:Auto( 0Mb) 0 0 0 0 0 AUTO
Drive D :Auto( 0Mb) 0 0 0 0 0 AUTO
Drive A :1.44M,3.5 in.
Base Memory : 640K
Extended Memory : 645612K
Other Memory : 384K
Total Memory : 66536K
ROM PCI/ISA BIOS(2A5LEU1C)
STANDARD CMOS SETUP
AWARD SOFTWARE, INC.
ESC : Quit # $ % & : Select Item PU/PD/+/- : Modify
F1 : Help (Shift)F2 : Change Color
Video : EGA/VGA
VGA Text Mode : Normal
VGA Graphics Mode : Normal
Halt On :
All, But Disk/Key
5.2 System Parameters
5.2.1 STANDARD CMOS SETUP
Normally, use only the factory (default) settings.
!
Date/Time
This data sets the PL's internal time and date.
Hours :00 - 23
Minutes :00 - 59
Seconds :00 - 59
! Drive C
This data sets the IDE hard disk's parameters. When this setting is set to
[AUTO], the hard disk's parameters are automatically read in. Also, if the
"IDE HDD AUTO DETECTION" is in use, the value entered there is
automatically set. The three options are [User],[Auto], and [None]. The
[Auto] setting is factory set and recommended for most users.
! Drive D
The three options are [User],[None]and [Auto].
! Drive A
This setting determines the format used by the PL's internal floppy disk
drive. The[1.44M - 3.5in] selection is factory set and recommended for
most users. The other available settings are [720K - 3.5in], [1.2M -
5.25in], [360K - 5.25in], [2.88M - 3.5in.], and [None].
Use the menu screen to select a System Item, and then enter the desired system
information. Each item's detailed settings are shown here.
* The above settings are factory settings.