PROFACE PL-B900 Series, User Manual

Page: 58 / 98

Installation and Wiring
4-4
PL B900/B910 Series Users Manual
1) Confirm that the PL’s power switch
is turned OFF. Then, remove the
power terminal’s transparent plas-
tic cover.
(Side View)
L
N
FG
Power Input Terminals
Connecting these two termi-
nals provides AC100V to
240V power.
L= live and N= Neutral
This terminal is connected
to the PL’s frame (chassis).
(screw size: M3)
Power Terminals
Power Switch
POWER
I
o
I:ON
o:OFF
PL-B900 Unit
4.3 Wiring the PL
4.3.1 Connecting the Power Cord
Connect the PL’s power cord to the PL’s rear face power terminals.
Use the following steps when connecting the power cord to the PL’s power terminals.
WARNING
• To prevent electric shocks, be sure to turn the PL OFF be-
fore connecting the power cord terminals to the PL.
• To avoid the dangers of fire, electrical hazards and equip-
ment damage, be sure to use only the specified power sup-
ply voltage when operating the PL.
Transparent Cover
FG
L
N
Screws