PROFACE PL-B900 Series, User Manual

Page: 70 / 98

System Setup
5-8
PL B900/B910 Series Users Manual
Selecting the POWER MANAGEMENT SETUP menu item calls up the follow-
ing screen.
! Power Management
You can choose from three power management options. These are [User
Define], [Min Saving] and [Max Saving]. The [User Define] selection is
factory set and recommended for most users.
! PM Control by APM
Designates if the power management is controlled by the APM. The two
selections available are [Yes] and [No]. The [No] selection is factory set
and recommended for most users.
! Video Off Option
Turns the display off. The selections are [Always On], [Suspend
%
Off],
and [All Modes
%
Off]. [Suspend
%
Off] is factory set and recommended
for most users.
!
Video Off Method
Designates the method of turning the display off. The available
selections are [V/H SYNC+Blank], [Blank Screen] and [DPMS
Support]. To turn off both the display and the Vertical / Horizontal
synchronous signal, select [V/H SYNC+Blank]. To turn off the display
only, select [Blank Screen]. Select [DPMS support] when the CRT
display is supported by DPMS. [V/H SYNC+Blank] is factory set and
recommended for most users.
Primary INTR : ON
IRQ3 (COM 2) : Primary
IRQ4 (COM 1) : Primary
IRQ5 (LPT 2) : Primary
IRQ6 (Floppy Disk) : Primary
IRQ7 (LPT 1) : Primary
IRQ8 (RTC Alarm) : Primary
IRQ9 (IRQ2 Redir) : Primary
IRQ10 (Reserved) : Primary
IRQ11 (Reserved) : Primary
IRQ12 (PS/2 Mouse) : Primary
IRQ13 (Coprocessor) : Primary
IRQ14 (Hard Disk)
: Primary
IRQ15 (Reserved) : Primary
ROM PCI/ISA BIOS(2A5LEU1C)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management : User Define
PM Control by APM : No
Video Off Option : Suspend
%
Off
Video Off method : V/H SYNC+Blank
MODEM Use IRQ : NA
**PM Timers**
HDD Power Down
: 10Min
Doze Mode : Disable
Suspend Mode : Disable
**PM Events**
VGA
: OFF
LPT & COM : LPT/COM
HDD & FDD : ON
DMA/master : OFF
ESC :Quit
$ % &
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
%
5.2.4 POWER MANAGEMENT SETUP
* The above settings are factory settings.