www.cranecpe.com
ASSEMBLY INSTRUCTIONS
DEPA® Closed Surface Diaphragms
Series nopped E4®
brands you trust.
Page 1: ...www cranecpe com ASSEMBLY INSTRUCTIONS DEPA Closed Surface Diaphragms Series nopped E4 brands you trust ...
Page 2: ...with piston fixture The piston rod features a wrench attachment point Hold it in place with a wrench pic 4 and 5 Remove the assembly consisting of outer piston diaphragm and inner piston piston rod is exposed On the opposite side take out the assembly consisting of the diaphragm inner piston outer piston and piston rod from the center block w o picture Detach piston rod from the second diaphragm b...
Page 3: ...iaphragm by hand picture 12 At the same time lock the piston rod with a wrench Install pump chambers insert valve seats and balls check for any damages and if required replace mount suction and discharge manifolds as per the DEPA IOM Pic 11 Pic 12 Tighten by hand Note For installation of DEPA nopped E4 diaphragms switch discs and set screws in the matching sizes are needed Switch disc material for...
