Printronix PrintNet P8000 Line, User Manual

Page: 205 / 240

Reset the PrintNet Password
205
Reset the PrintNet Password
Occassionally a user will set a root user password on the PrintNet
and then forget it. This is the procedure to reset the root password
back to the default (no password).
1. Turn the printer on.
2. Take the printer offline and unlock the front panel by pressing
the up and down arrows keys at the same time, then releasing.
3. Press all four arrow keys (up, down, prev, next) at the same
time, and release.
4. Press the right (next) arrow until PNE Access appears.
5. Press the down arrow and then the right (next) arrow until “E-
NET To DEFAULT” appears.
6. Press Enter.
7. Re-program the IP address information from the front panel.
NOTE: Steps 1 – 5 also clears the IP address information and sets
the PrintNet back to the factory default.
TCP Access Lists
Within TCP/IP environments, the PrintNet can restrict host access
to destinations/queues and remote command (e.g., rsh, rcmd,
remsh, and telnet) execution services. This is done using an access
list similar in function to the Unix .rhosts file.
NOTE: Access list settings are not configurable through the HTML
forms provided with the PrintNet.
To view the current access list on the print server:
1. Start a Telnet session with the PrintNet.
Syntax:
telnet NICIPaddress
2. Log in as
root
and press ENTER at the password prompt
since there is no password by default (or your password for
your home set).