Printronix PrintNet P8000 Line, User Manual

Page: 198 / 240

Chapter 12
Complete Command List
198
list model [ model ]
List the current model settings (e.g., names and mapped
destinations). With no
model parameter, a table of values for
name, type, banner, config and the size in bytes of header and
trailer are shown for all models m1 through m8. When the
model parameter is supplied, the specific bytes used in the
header and trailer are shown, along with the banner type, data
type and configuration number for that specific model.
list net
List all current TCP/IP network settings (e.g., IP address and
subnet mask).
list pping
List all the current periodic ping setting.
list pserver
List the current general print server settings (e.g., print server).
list ptrcfg
List the printer configuration
list ptrmgmt
List the current printer management port numbers.
list snmp
List the Trap Table containing SNMP Managers.
list sysinfo
List the current PrintNet system information (e.g., contact name
and protocol stacks enabled).
list tcpip
List all current TCP/IP network settings (e.g., IP address and
subnet mask).
list test
List the status of output tests on the I/O ports.
list tn
List all current tn protocol settings.
list uptime
Lists how long the PrintNet has been up and running from the
last reset.