Printronix PrintNet P8000 Line, User Manual

Page: 194 / 240

Chapter 12
Complete Command List
194
set snmp alerts <index> [-]all | [[-]warning]
[[-]offline] [[-]mediainput] [[-]mediaoutput]
[[-]mediapath] [[-]marker] [[-]cutter] [[-]barcode]
[[-]scanner] [[-]intervention] [[-]consumable]
[[-]label][[-]powercart] [[-]rfid]
Example:
set snmp alerts 1 warning -cutter
Specifies which alert groups are enabled for reporting via an
SNMP manager, e-mail alert message, and/or Unix syslog
daemon. See Table 2 on page 54 for a description of specific
printer events belonging to each group.
The index is the index number of the SNMP manager/alert
table.
“-all” disables and “all” enables reporting of alerts in all alert
groups. Individual alert groups can be selectively enabled or
disabled via combinations of alert group switches. For
example, to enable warning alerts and disable cutter alerts for
SNMP table entry 1, enter the following:
set snmp alerts 1 warning -cutter
set sysinfo label|name [<STRING>]
Example:
set sysinfo name salesprinter
Set a descriptive name defined by <string> for PrintNet
identification purposes. This is not used in the operation of the
print server in any way.
set sysinfo contact [<STRING>]
Example:
set sysinfo contact Paul_Harris
Set a person or department to contact in case of print server
trouble.
set sysinfo location [<STRING>]
Example:
set sysinfo location salesdept
Set the physical location of the PrintNet. This is for
identification purposes and is not used in the operation of the
print server in any way.
set sysinfo prnserial [<STRING>]
Example:
set sysinfo prnserial 000123456789
Sets the printer serial number.