Printronix PrintNet P8000 Line, User Manual

Page: 192 / 240

Chapter 12
Complete Command List
192
set snmp
To add a user named
snmp
with root privileges, follow the steps
below:
1. Login to the Ethernet as a root user.
2. Add a user named
snmp
:
set user add snmp
3. Set the user type to
root
:
set user type snmp root
4. Set the password for the snmp user:
set user passwd snmp snmppassword
5. Save the changes:
save
The user
snmp
is now created and
snmppassword
is the only
community string which will allow write access.
set snmp manager <INDEX> <IPADDRESS> < TRAP-COMMUNITY>
The PrintNet continuously generates traps. To set the PrintNet
to send traps to a particular SNMP manager, use this
command to add an SNMP manager to the trap table.
<index> is the index number of the trap table. <ipaddress is the
IP address of the SNMP manager receiving traps. <trap-
community> is the community string sent along with the trap
information.
set snmp trapport <INDEX> < UDP_PORT>
Set the UDP port number in the SNMP trap manager table.
This value should correspond to the port number monitored by
the SNMP manager application running on the host at the IP
address specified in the ‘set snmp manager’ command.
<index> is the index number of the SNMP trap manager table.
<udp_port> is the desired UDP port number. Acceptable
values are 162, and 49152 through 65535.