Printronix PrintNet P8000 Line, User Manual

Page: 178 / 240

Chapter 12
Complete Command List
178
store ifc default <IFNUM>|<0> (0 for no default)
Store the specified interface as the default interface. The other
interface is no longer active after power cycle. The 0 allows for
both interfaces to be active.
store ifc <IFNUM> mode auto|10half|10full|100half|
100full
Store the specified interface mode as automatic, 10mbps half
duplex, 10mbps full duplex, 100mbps half duplex, 100mbps full
duplex. See page 21.
store pping opts [-]enable
Example:
store pping opts enable
Store the state of periodic ping flag. If the periodic ping flag is
enabled the PrintNet periodic ping client will attempt to ping its
default gateway on its active PrintNet interfaces.
Default: disabled
store pping packet <NUMBER OF PACKETS>
Example:
store pping packet 1
Store the value of the packet. It is the number of ICMP Echo
Request packets that will be sent by the periodic ping client on
each period.
Default: 1
store pping period <MINUTES>
Example:
store pping period 5
Store the value of the period. <minutes> is the amount of time
from 1 to 5 minutes defines the periodic ping sequence will be
repeated.
Default: 5
store pping from default
Example:
store pping from default
Store all the periodic ping default settings to flash memory so
that they are retained after power up.