Printronix PrintNet P8000 Line User Manual Download Page 85

Page: 85 / 240

z/OS Configuration,

IPDS Printer

Overview

Use this chapter to configure z/OS to print IPDS files on your line
matrix network printer.

To print IPDS files, you must have the IPDS option on the printer.

Requirements

Verify that you have the following required software:

•

PSF Version 2.2.0 with APAR OW15599 (for TCP/IP support)

•

z/OS Scheduler with APAR OW12236 to support two new
PRINTDEV keywords: IPADDR and PORTNO

•

TCP/IP Version 3 Release 1, or higher, installed and configured
on z/OS

To obtain the PTFs associated with these APARs, contact the
support center.

Summary of Contents for PrintNet P8000 Line

















































































































































































































































Search results

Summary of Contents for PrintNet P8000 Line

Reviews:

Related manuals for PrintNet P8000 Line

Brands by name

Popular brands

Printronix PrintNet P8000 Line, User Manual

Search results

Summary of Contents for PrintNet P8000 Line

Reviews:

Related manuals for PrintNet P8000 Line

Brands by name

Popular brands