Printronix PrintNet P8000 Line, User Manual

Page: 137 / 240

Configuring PSF with CRTDEVPRT on V4R2 and Above
137
Font (FONT)
Enter an appropriate value.
Form Feed (FORMFEED)
Specify *CONT .
Activation timer (ACTTMR)
This value specifies the number of seconds that PSF waits for a
printer to respond to an activation request. If only one system is
using the printer, use the default value (170 seconds). If more than
one system is using the printer, specify
*NOMAX , which causes
PSF to wait indefinitely for a response to an activation request.
Remote Location (RMTLOCNAME)
Enter the IP address or hostname of the printer.
User-Defined Object (USRDFNOBJ)
To use a PSF configuration object, specify its name and library
here. This object type must be *PSFCFG. For V3R7 and higher, a
single PSF configuration object may be referenced by multiple
device descriptions, if required.