Printronix PrintNet P8000 Line, User Manual

Page: 101 / 240

101
7
AS/400 Configuration,
ASCII Printer
Overview
This chapter details a complete AS/400 configuration setup
including:
•
Developing Line Descriptions with CRTLINETH
•
Configuring the AS/400 for TCP/IP
•
Configuring the AS/400 for Printing
•
Verifying Printing from the AS/400
This document assumes no AS/400 printer configuration has been
done. If any configuration has been done, please follow the
procedure to the point at which continued configuration is required.
Developing Line Descriptions With CRTLINETH
For each PrintNet printer on the AS/400, a line description needs to
be created. This is required for Release V3R2 and V3R7.
If a line description already exists, make sure the SSAP list
includes default options “AA” and “12.” You must also know the
LAN speed for the AS/400 LAN printer.
NOTE: To change a line description, you need to vary the line off
before making the change. After making the change, you
need to vary the line back on.
To change an existing line description, use the CHGLINETH
command. To create a line description, use CRTLINETH.