Printronix PrintNet P8000 Line User Manual Download Page 104

Page: 104 / 240

Chapter 7

Configuring AS/400 for ASCII using TCP/IP

104

Figure 27. Example of ADDTCPIFC Interface

The following parameters must be specified:

Internet Address

Internet address of the AS/400 LAN printer.

NOTE:

Do not use the IP address of the PrintNet.

Subnet Mask

The Subnet Mask for this AS/400 TCP/IP interface (for example,
255.255.255.0).

Line Description

The name assigned to the AS/400 line description as described in
“Developing Line Descriptions With CRTLINETH” on page 101.

NOTE:

Each AS/400 LAN printer will have its own line description.

System: BLDD6

Internet address:

9.99.15.188

Subnet mask:

255.255.255.0

Line description:

ETHLAN

Line type:

*Elan

Interface status:

Inactive

Type of service:

*Normal

Maximum transmission unit:

*Lind

Automatic start:

*Yes

Summary of Contents for PrintNet P8000 Line

















































































































































































































































Search results

Summary of Contents for PrintNet P8000 Line

Reviews:

Related manuals for PrintNet P8000 Line

Brands by name

Popular brands

Printronix PrintNet P8000 Line, User Manual

Search results

Summary of Contents for PrintNet P8000 Line

Reviews:

Related manuals for PrintNet P8000 Line

Brands by name

Popular brands