PRIMERGY BladeFrame BF200, Initial Setup Manual

Page: 31 / 115

Site Preparation
Release 5.0 2-11
• You may set only those resolutions and refresh rates specified in
the “Technical data” section of the monitor description.
Otherwise, you may damage your monitor. If you are in any
doubt, contact your sales outlet or customer service center.
Batteries
CAUTION!
• Incorrect replacement of batteries may lead to a risk of
explosion. The battery may only be replaced with an identical
battery or with a type recommended by the manufacturer.
• Replace the lithium battery on the system board in accordance
with the instructions in the technical manual for the system
board.
Note about the Laser
The CD/DVD drive is classified for laser class 1 according to IEC
60825-1.
Caution: The CD/DVD drive contains a laser diode (LED).
Sometimes, the LED produces a stronger laser beam than laser class
1. Direct view into the laser beam is dangerous.
Caution: Never remove parts of the CD/DVD drive
assembly!
Notes on Handling CDs/DVDs and CD/DVD Drives
CAUTION!
• Use only CDs/DVDs in proper condition in the CD/DVD drive
of your server to prevent data loss, damage to the device and
injuries.
• Therefore, check each CD/DVD for damage, cracks, breakage
etc. before inserting it in the drive.