Installing the Hardware
Release 5.0
3-9
In order to fasten the side rails, cage nuts with threaded
mounting holes need to be inserted. Please proceed as follows:
Figure 3.5 Inserting the cage nuts
7.
Insert the cage nut as shown in the figure with the bottom part of
the cage in the appropriate mounting hole of the support upright
(1).
8.
Lever the upper part of the cage nut into the mounting hole as
shown.
9.
The cage nut should lock into the mounting hole as shown (2).
Summary of Contents for BladeFrame BF200
