Site Preparation
Release 5.0
2-13
•
The equipment and tools you use must be free of static charge.
•
Remove the power plug from the power socket before inserting
or removing components containing ESDs.
•
Always hold components with ESDs at the edges or at the
positions highlighted in green (touch points).
•
Do not touch any exposed pins or conductors on a component.
•
Place all components on a static-safe base.
Note:
You will find a detailed description for handling ESD
components in the relevant European or international standards (EN
61340-5-1, ANSI/ESD S20.20).
Other important notes
When cleaning the device, please observe the following notes:
CAUTION!
•
Switch the server off, and pull the power plug out of the
grounded-contact power socket.
•
Do not clean any interior parts yourself; leave this job to a
service technician.
•
Do not use any cleaning agents that contain abrasives or
may corrode plastic.
•
Ensure that no liquid enters the system. Ensure that the
ventilation areas of the server and the monitor are free.
Use a cloth for disinfection to clean the keyboard and the mouse.
Wipe the server and monitor casing with a dry cloth. If
particularly dirty, use a cloth that has been moistened in a mild
domestic detergent and then carefully wrung out.
Keep this operating manual and all additional documentation (such
as the technical manual, CD) together with the device. All
documentation should be included if the device is passed on to a
third party.
Summary of Contents for BladeFrame BF200
