Initial Setup Guide cBlade ES
5-10
Release 5.0
Figure 5.4 Connecting to the Serial Port of a cBlade
2.
Open a management console on each cBlade using either a
Linux or Windows laptop, or a terminal connector, as described
in the following sections.
Connecting to a
cBlade With a
Linux or
Windows Laptop
If you choose to use a directly connected laptop, use a terminal
emulation program, such as HyperTerminal
on Windows,
or
Minicom
on Linux.
Table 5.1
shows the terminal session settings.
Note:
If you are
re-installing
software using Windows and
HyperTerminal, HyperTerminal Private Edition
is required to access
the BIOS Setup Utility. You can download this version from
www.hilgraeve.com
.
Summary of Contents for BladeFrame BF200
