PRIMERGY BladeFrame BF200, Initial Setup Manual

Page: 105 / 115

Making Network and SAN Connections
Release 5.0 5-27
4. Continue connecting cables for each Fibre Channel port on the
cBlades.
Your BladeFrame BF200 is physically connected to your SAN
environment, but you might need to perform additional connection
setup steps, as described in
PRIMERGY BladeFrame SAN
Integration Guide .
Note: If you want to add a large number of SAN devices after your
BladeFrame BF200 initial configuration, shut down both cBlades,
make the required connections, and then reboot the cBlades.
Warning: When handling Class 1 laser devices and cables, DO
NOT look directly into the connector or laser light source, because
this could cause serious eye injury or blindness.
!