Installing the Hardware
Release 5.0
3-11
13.
Mount the PRIMECENTER Rack cable management
(articulated cable guide) as described in the Technical Manual
of the respective rack.
Installing the Side Rails in a Third-Party Rack
The BladeFrame BF200 is supplied with side rails that can be used
in a standard rack to support the chassis.
For mounting the server in a 3rd-Party Rack the following parts are
necessary:
•
two side rails
•
protective hose for fibre channel optical waveguide cable, if
applicable
To install the side rails:
1.
Take the original manual of the rack manufacturer regarding the
mechanical installation and/or the climatic conditions to
assistance.
Caution:
With the installation in 3rd-Party Rack it is to be made
certain that the air flow is ensured from the front to the rear in the
rack.
2.
Mount the necessary manufacturer original parts (like support
bracket or cable management).
Note:
Sometimes a number of parts of the delivered mounting
kit cannot be used because original parts of the 3rd-Party Rack
are to be used.
3.
Mount the prepared rails as described in
Installing the Side Rails
in the PRIMECENTER Rack
. Follow Step 1. through Step 4. in
that procedure.
Summary of Contents for BladeFrame BF200
