PrimeLab 1.0 MULTITEST, User Manual

Page: 283 / 353

250 250
11) Replace the lid. Swivel the cuvette to mix the liquid and the reagent
until this is competely dissolved. Press the TEST button and wait for the
end of the 2 minute countdown. The cuvette does not have to be inside
the sampling chamber at this time.
12) Unscrew the lid.
13) Add 3 drops "PL DPD Neutralising" liquid reagent to the test liquid in
the cuvette.
14) Replace the lid on the cuvette, swivel it carefully and insert it in the
sampling chamber of the PrimeLab. Align the arrow on the front of the
cuvette. Press TEST.
15) The determined result is immediately displayed. Press button 3 to
convert the result to different units (*). Press button 4 to save the result
together with date and time.
4
3
4
4
Notes
-> DPD 1 A and DPD 1 B reagent MUST be added to the vial BEFORE water
sample is added to avoid mis-readings!
-> (*) Conversion of the measurement result to mg/l (ClO )
2
0 - 8 mg/l (Cl )
2
Name on device: 108-Total-Oxid-liq
(108)
Total Oxidant
Liquid
Continued...
!
Possible messages in the line below the measurement value:
"low! / high! / good!":
Assessment of the measurement value relative to the ideal range defined by you.
"Overrange! / underrange!":
Measurement value for this parameter is outside the value range of this method.